NETIS P106C
4POE+2RJ45 100M Standard POE Switch
Netis P106C is a 100M standard POE switch that provides 6*10/100M adaptive RJ45 ports. Ports 1~4 feature POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable. Supports two modes: normal switch mode/250M ultra-long transmission. P106C makes it easier for you to deploy wireless access point (AP) and IP terminal network devices using POE technology.
Hardware: |
|
Interface: | 4*10/100Mbps POE ports (Data/Power)
2*10/100M uplink RJ45 ports (Data) |
Basic Function: | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme |
Standards: | IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control |
Mode: | Normal switch mode/ Extend Mode |
Data Transfer Rate: | Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)
Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex) |
Store & Forwarding: | Yes |
Switching Capacity: | 1.2G |
MAC Address Table Size: | 2K |
Jumbo Frame: | 2048 byte |
Environment: | Operation Temperature:0℃~40℃
Storage Temperature:-40℃~70℃ Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing |
Power Input POE Standards: | Single port maximum power 30W,
Whole switch maximum power 120W Support over-current, over-voltage, and short-circuit protection Support Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- AC 110~240V 50/60HZ |
Cabling Type: | 100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤250m) |
Dimensions:
(L×W×H) |
124mm*115mm*33mm |
Warranty: 01 Year (Official Warranty).
Reviews
There are no reviews yet.